Furnace Control

FurnStar is an extension of the industry-leading submerged-arc furnace controller developed by Mintek – the Minstral, which is installed on over 100 furnaces in 9 countries. FurnStar extends Minstral’s capabilities beyond controlling electrode penetration and power input to the furnace, to include a number of electrode management and process control tools.


Furnstar Minstral

FurnStar Minstral is a submerged-arc furnace control system that optimises furnace operation by means of a patented resistance algorithm, enabling stable operation at optimal power.

Typical Benefits of Minstral Control:

  • Improved power input (MWh).
  • Lower specific energy consumption (MWh/ton).
  • Improved load factor.
  • Reduced electrode consumption.
  • Reduced electrode breakages.
  • Improved recovery.

Electrode Resistance Control:
The Minstral uses calculated electrode-to-bath resistances to control the penetration of the individual electrodes. Primary measurements are used in the resistance calculation to improve accuracy, as opposed to using inaccurate and unreliable secondary measurements. No hearth connection is necessary.

Power Control
Using the accurate calculation of the furnace load, Minstral is able to predict alternative operating points in real-time. This predictive power control strategy ensures that the furnace is operated at its optimum under all operating conditions, within the limitations of the furnace circuitry. In addition, there is the option of differentially tapping the furnace transformers to provide even tighter control and compensation for unbalanced loads.


FurnStar Slipping Scheduler

The FurnStar Slipping Scheduler is aimed at replacing the inaccurate and unreliable manual techniques with an accurate, dynamic, and flexible automated system. The FurnStar Slipping Scheduler comprises an industrialised slip measurement device – the “Slipmeter”, an electrode length estimator, and the scheduler itself. The slipping rate is automatically adjusted by considering electrode position, length and baking current.

The Slipmeter
Fundamental to the FurnStar Slipping Scheduler is an accurate and reliable measure of slip provided by the Slipmeter. The Slipmeter has a rugged design for operation in the harsh environment at the electrode slip rings, has electrical and mechanical isolation, and vibration damping and compensation.

The Electrode Length Estimator
The Electrode Length Estimator uses the actual slip provided by the Slipmeter together with electrode consumption estimates to deduce the electrode length. The electrode consumption can be linked to a number of factors which are monitored and accounted for continuously. The Electrode Length Estimator has the facility to back-calculate and correct consumption rates based on actual electrode measurements if and when these are taken.

The Scheduler
Taking the electrode baking level into account, the Scheduler manipulates the slipping rates (within a permitted range) to achieve the desired electrode length and electrode holder position. The Scheduler has a number of modes of operation, from merely prompting the operator to slip the electrode at the appropriate times, to controlling the electrode slipping completely.


FurnStar Baking Controller

The FurnStar Electrode Baking facility controls the electrode current through the electrode after long slips are taken to ensure proper baking of the electrode, and after long shutdowns to prevent thermal shock to the electrodes.

Customisable libraries of electrode baking and recovery (warm-up) profiles form the basis of the FurnStar Electrode Baking module. If a slip measurement is available, the module can automatically select and begin the appropriate baking schedule when a long slip is taken (otherwise the operator can initiate the profile).

The FurnStar Baking Controller can be configured to dynamically compensate for baking currents less than those required by the baking profile to ensure that electrode is baked properly.


FurnStar Roses

FurnStar Roses is a real-time, on-line electrode temperature and stress profile simulator that uses finite element analysis of the current and heat flow distributions within the electrode to simulate the temperature profile as well as thermal and mechanical stresses within the electrode. The model uses online measurements of the electrode slip and boundary temperatures to ensure accuracy.


FurnStar Power Optimiser

The FurnStar Power Optimiser is the next-generation power controller that provides improved control and increased flexibility in terms of the objectives of the controller. The Power Optimiser is based on an objective function in which different weightings can be placed on the various parameters, such as power input and current asymmetry (unbalance).


FurnStar Resistance Optimiser

The FurnStar Resistance Optimiser continuously monitors changes in operating conditions and adjusts the resistance setpoint appropriately to ensure that the optimum electrical operating point is maintained. The Resistance Optimiser is most suited to furnaces where the furnace transformer(s) are often operated on maximum tap position(s), or where the furnace is operated close to electrode current and transformer MVA limits.



FurnStar Charming provides a dynamic display of the furnace characteristic curves, and has been developed to present furnace operating personnel with a visual representation of the operating point of the furnace.